The brake pads of your car are not the simplest thing to change in a car, but many times, people seem not to have a tough time with it. The first thing you need to do is to jack up your car and make sure there is enough support provided. This is because you are going to have your wheels off to be able to change out your brake pads. Then you need to remove the wheel cover using a screwdriver. Use a lug wrench and take off the wheel.
Now you can take out the pins and bolts using socket wrench. After this, you can easily lift the caliper off and away from your brake rotor. Please note that you should not allow the caliper to just hang by its rubber brake hose. Make sure to check for any crack as well as any kind of gouges that could be in it. After checking that, you will want to remove the worn out brake pads from the caliper, which you have not left hanging, right?
Now put the new brake pads in. You have to be sure to install the brake pads on the correct side of the caliper. One way to ensure is to check your outboard is the pad that has a wear sensor on it. fter putting them on the right side, then you can add back in the clips and all the pins. Sometimes it can be hard to get the pad into place. After performing all the tasks, you need to put the wheel back and check all nuts and bots.
Searching for genuine brake pad set and brake pads? Mac Auto Parts carry a huge selection of automotive parts online including: exhaust, suspension, steering, wheel bearings, brake pads, brake rotors, fuel injectors, timing kits, water pumps and more.
This article is free for republishing
Source: http://macautoparts.articlealley.com/know-more-about-replacing-brake-pads-2271867.html